Top-line packagingTel: +86 188 2689 9458

Top-line packagingEmail: info@toplinepackaging.com

Top-line packaging
Top-line packaging
Top-line packaging
Top-line packaging Home  >  NEWS  >  Industry News

Introduce you how to use Zipper Vacuum Sealer Bag.zipper vacuum sealer bag

source:Industry News release time:2023-03-08 Hits:    

  vacuum zipper bags company

  Zipper Vacuum Sealer Bag, also known as a close -fitting tide -proof bag, aluminum foil bag, aluminum -plastic composite bag, is generally made of PET/AL/CPE or PET/NY/AL/CPE. Among them, PET -printing effect is good, NY -low oxygenity, AL -strong obstruction, opaque, CPE -internal packaging. Glue: water -soluble glue (more hygienic, environmentally friendly, non -residual solvents). Zipper Vacuum Sealer Bag has good anti -static, oxygen, shielding, moisture -proof, light -shielding function and excellent thermal performance. How to use Zipper Vacuum Sealer Bag:

  1. Pay attention to the bag before and after inflatable. Don't scratch the sharp objects. When operating, it should be performed on the bed or clean desktop. If there are hard objects such as buttons such as buttons, zippers, etc. in the storage items, fold them and put them in a collection bag. When stored in a cabinet or elsewhere, pay attention to whether there are sharp objects in the storage area to ensure that the bag is intact.

  2. Try to put clothes, quilts and other items in the bag as much as possible. The zipper of the seal is at least 3-5 cm. Do not force it in large items.

  3. In order to ensure the cleanliness of the sealing zipper, if the fiber and dust enter, the sealing performance will be reduced. It is recommended to wipe it with a wet gauze before pulling the zipper. After turning off the zipper, please hold the pull head with your hand and pull it back and forth several times at the seal to ensure that the two tones of the seal are completely buckled into the groove to ensure the sealing effect.

  4. When using the pump, twist the thread interface of the pump to the end, and press it on the white rubber pads of the pumping mouth to ensure that there is no air leakage at the interface. Generally, a large bag needs to suck for 3 to 5 minutes. It takes about three times and 500 to have obvious flattening phenomena. When using a pump, pay attention to continuous suction. If there is a vacuum cleaner at home, it will be effort and convenient.

  5. After pumping, check the seal again to ensure the seal.


Read recommendations:

PET food bag

Spout pouch price

Spout pouch Production

Bag material shelf life analysis of food packaging bags

How to choose the thickness of vacuum bag

Popular recommendation

Share:

Email

Wechat Whatsapp

Leave Your Message